CAI has both single and multiple hammer - driven tooling systems for maximum flexibility in the shop or in the field.

Riv-Nail Multi-Driver Complete Tool Kit

All Multi-Driver Tool Kits include the application tool, two Rivet Guide Blocks, two RNMDP-5 Rivet Drivers, two RNMH-4 Hammers (4 lbs.), one BG-96 Belt Gauge, one SL-8 Silicone Spray, and one tote bag.

MRNAT_Took_Kit_Group

For Use With

R-2 through R-6 with 1/4" GAUGE ROD
Number
MRNAT-36
MRNAT-42
MRNAT-48
MRNAT-60
MRNAT-72
MRNAT-84

For Use With

R-5 1/2 and R-6 with 7/16" Heavy-Duty Gauge Rod that helps control splices during installation.
Number
MRNAT-42-MDA2
MRNAT-48-MDA2
MRNAT-54-MDA2
MRNAT-60-MDA2
MRNAT-72-MDA2
MRNAT-84-MDA2

For Use With

TR-6 and R-8 with Heavy-Duty Gauge Rod helps control splices during installation.
Number
MRNAT-60/8-MDA2
MRNAT-72/8-MDA2
MRNAT-84/8-MDA2

Riv-Nail Single-Driver System

For many applications, the manual Riv-Nail Single-Driver System is quick and reliable. Only a hammer and our manual application tool are required. While most 1 to 3 lbs., well-balanced hammers will drive the Riv-Nail through the belt, the best hammer for the job is a 32 oz. “dead blow.” An average of only three blows will set the rivet, using the patented Riv-Nail Application Tool. Hammer not included.

For many applications, Conveyor Accessories' manual Riv-Nail Single-Driver System is quick and reliable. Only a hammer and our manual application tool are required.

Application Tool

Number
RNAT-24
RNAT-30
RNAT-36
RNAT-42
RNAT-48
RNAT-54
RNAT-60
RNAT-72